CR40/42/50 MKII Chart menus and INFO windows
Chapter 3
24
3.3.3 Cursor placed on waypoint
ENT
With chart in active window, and cursor placed on a waypoint, press
[ENT]
to
call up an info window
with the following to choose from:
WP found
Name: WP 1
LAT 51°49.107N
LON 5°16.007W
-Example.
1
Edit user data
2
Chart info
-Refer to Appendix C.
3
Find nearest port services
-Refer to Appendix C.
4
Bearing & dist. from A to B
-Refer to section 3.3.2.
5
Lock cursors
-Refer to section 3.3.2.
9
Chart setup
-Refer to section 3.4.
0
Cursor to center
-Refer to section 3.3.2.
GOTO
Select NAV mode
-Refer to section 3.3.8.
PLOT
Plot new data
-Refer to section 3.3.9.
PAGE
More user data
MENU
Exit
-Exit info window.
1
Edit user data
opens for a new info window:
Waypoint
1
Edit
Change the name, symbol, color, etc.
2
Move
Move waypoint with cursor, and press
[ENT].
CLR
Delete
Delete waypoint ? “YES” / “NO”.
MENU
Exit
Exit info window.
PAGE
More user data
will be available if more than one point is plotted on
the same position, where the [PAGE] key then will toggle between data
for each point.
