Sime 8115101, User, Installation And Servicing Instructions

Page: 50 / 80

50
7 COMMISSIONING
7.1 Preliminary operations
a
WARNING
– Should it be necessary to access the areas in the bot-
tom part of the appliance, make sure that the system
components and pipes are not hot (risk of burning).
– Before replenishing the heating system, put on pro-
tective gloves.
Before commissioning the appliance, check that:
– the type of gas is correct for the appliance
– the gas isolation valves for the heating system and the water
system are open
– the system pressure as shown on the pressure gauge when the
system is cold , is between
1 and 1.2 bar
– the pump impeller rotates freely
– the siphon has been filled
– the flue is fitted correctly.
7.2 Before commissioning
After having carried out the preliminary checks, perform the fol-
lowing to start the boiler:
– set the main system switch to "ON"
– after a few seconds, the “Main screen” is shown
ON
Menu Mode Zones
Mon 01.01.2018 10:30
Fig. 60
– turn the encoder to select the “Mode” (Mode) function
– press the click encoder to go to the screen to select the
“
Function mode”
(MODE). Turn the encoder to select the
preferred mode e.g. “Winter” (Winter)
Summer Winter Off
Hot water MAN 40
°C
Heating
Esc
Fig. 61
– adjust the air thermostat and check that the boiler starts and
operates correctly.
7.3 Main control panel display and settings
m
CAUTION
We recommend not changing the factory settings so as
not to alter optimal appliance operation. For any spe-
cific support, please contact the
Sime
Technical Assis-
tance Service.
7.3.1 Settings using the MODE function
From the “Main screen”:
Menu Mode Zones
Mon 01.01.2018 10:30
Fig. 62
– turn the encoder to select the
“Mode”
(Mode) function
– press the click encoder to go to the screen to select the “
Function mode”
(MODE). Turn the encoder to select the
preferred mode e.g. “Winter” (Winter)
Summer Winter Off
Hot water MAN 40
°C
Heating
Esc
Fig. 63
– press the
click
encoder to confirm the highlighted “Mode”
and go to the “rows”
7.3.1.1 Domestic hot water
– turn the encoder to select
“Hot water”
(DHW)
– press the click encoder to confirm
“Hot water”
(DHW) and
open the submenu
Hot water
Function Mode MAN
Zone heating 45°C
Program. Time [...]
Summer Winter Off
Hot water MAN 40
°C
Heating
Esc
Fig. 64