5
Neutro-Vac
5200470 Rev B
web. Debris is captured and drawn into the vacuum system through an inlet. This
configuration is used in applications where web material can tolerate contact and
requires aggressive cleaning.
Dust Collectors
Simco-Ion’s standard line of dust collectors provide high efficiency, intermittent or
continuous-duty dust collection using either cartridge or bag filters. The cartridge
filter units use automatic shaking action to clean the filters each time the unit is shut
down. The continuous duty units use pulse jet airflow to purge the filters of dust.
The bag filter units require a manual shaking by the collector operator. All models
are acoustically lined inside the blower chamber for noise reduction.
Receipt of Equipment
1. Carefully remove the equipment from the packaging.
2. Inspect contents for damage that may have occurred during shipment. If any
damage has occurred during shipment, the local carrier should be notified at
once. A report should be forwarded to Simco-Ion, 2257 North Penn Road,
Hatfield PA 19440, (215) 822-6401.
3. Empty the packaging to ensure that small parts are not discarded.
3. SPECIFICATIONS
Requirements
Vacuum System
Vacuum Hood
1.2” of water
Volume
8 CFM per inch of intake slot (1/4” slot width)
Compressed Air
System
Pressure
5 psi minimum, 20 psi maximum
Volume
0.25 SCFM per inch of intake slot (at 5 psi)
0.50 SCFM per inch of intake slot (at 10 psi)
1.00 SCFM per inch of intake slot (at 20 psi)
NOTE: Compressed air must be clean and dry. Hoses and fittings must be of adequate size to
provide required airflow.
High Voltage
IQ Easy Static Bar
Speed-T (24 VDC, 0.75A)
Hybrid-T (24 VDC, 0.75A)
MEB Static Bar Power Supply F167 (120 VAC, 50/60 Hz, 0.25 A)
F267 (230 VAC, 50/60 Hz, 0.12 A)
NOTE: Maximum 2 static bars or 200” total static bar length can be used with power supply models
F167 and F267.
