1
Neutro-Vac
5200470 Rev B
1. SAFETY WARNINGS
PLEASE READ INSTRUCTIONS COMPLETELY BEFORE STARTING
INSTALLATION.
ALL INSTALLATION AND MAINTENANCE OPERATIONS MUST BE
PERFORMED BY QUALIFIED TECHNICAL PERSONNEL.
NOTE
– Statements identified with a NOTE indicate precautions
necessary to avoid potential equipment failure.
CAUTION
– Statements identified with a CAUTION indicate potential
safety hazards.
WARNING
– Statements identified with WARNING indicate potential
serious injury hazards.
CAUTION – Electrical Shock Hazard
High voltage is hazardous for people with a pacemaker
WARNING – Fire Hazard
Do not install or operate equipment in close proximity to any flammable
solvents or flammable materials.
NOTE
– This equipment must be correctly installed and properly
maintained. Adhere to the following cautions for safe installation and
operation:
1. Read instruction manual before installing or operating equipment.
2. Only qualified service personnel are to perform installation and repairs.
3. This equipment must be installed and maintained as outlined in this manual.
Disconnect and lockout all power before servicing this machine, unless
instructions state otherwise. Turn off web drive equipment and remove web, if
possible, before performing maintenance.
4. Failure to properly ground the static bar power supply may result in an electrical
shock hazard to personnel and inefficient operation of the equipment. Do
not apply line power until all grounds and high voltage connections have been
completed.
5. Do not pour alcohol on static bars or soak static bars in alcohol at any time or
damage to the static bar may result.
6. Do not hang rags on static bar or a fire may result.
7. To avoid a potential fire hazard caused by sparks in the dust collector, do not
mix combustible materials such as buffing line, paper, wood, dust, aluminum
and magnesium with dust generated from grinding ferrous metals.
