EN
14
Problem
Possible cause
Solution
No function when ON/OFF Switch (12) is
operated
Switch Lock engaged
Press and hold the Switch Lock before pressing the ON/OFF Switch
Battery (10) completely discharged
Recharge Battery or replace with a fully charged battery
Defective Battery
Replace Battery
Defective ON/OFF Switch
Have the ON/OFF Switch replaced by an authorised Silverline
service centre
Carbon brushes worn
Have the carbon brushes replaced by an authorised Silverline
service centre
Faulty tool
Contact authorised Silverline service centre for repair
Slow cutting performance
Saw Blade (19) not suitable for the material being cut Fit compatible saw Blade
Saw Blade blunt
Fit new saw Blade
Saw Blade blunts quickly
Saw Blade not suitable for the material being cut
Fit compatible saw Blade
Too much pressure exerted on to the tool
Use less pressure whilst moving the tool
No cutting fluid/cooling agent used when cutting
metal
Use a suitable cutting fluid when cutting metal
938778_Manual.indd 14
27/03/2020 10:30
Summary of Contents for 938778
