Shenzhen Santone SilverCon
Email: [email protected]
Web: www.silver-con.com
Page: 61
SCW001 User Manual
•
Failure to connect to the Internet through the wireless router
(1) Place the router to the wireless area where the CPE can connect.
(2) Check whether the wireless network card connects to the correct AP (base station).
(3) Check whether the wireless channel accords with the channel specified in your country or region.
(4) Check the encryption settings.
(5) Check whether your ADSL cable is connected to the correct network interfaces.
(6) Replace with a new network cable to connect to the router.
• Failure to access the Internet
(1) Check whether the status of indicators on the ADSL modem and the wireless router is normal.
(2) Check whether the WAN indicator is on. If the WAN indicator is off, check whether the cable con
-
nected to the WAN interface is loose.
(3) When the Link indicator keeps on but does not blink, the router is connected to the Internet.
(4) Reboot your computer.
(5) Set the AP again.
(6) Check whether the WAN indicator is on.
(7) Check the encryption settings of the wireless network.
(8) Check whether the PC that connects to the router can obtain the IP address through either the wire-
less network or the cable network.
(9) Check the LAN settings of your Internet options, and do not use a proxy server for your LAN. See the
following figure: