Shenzhen Santone SilverCon
Email: [email protected]
Web: www.silver-con.com
Page: 37
SCW001 User Manual
After setting, click Apply to save the settings.
6.5 Forwarding Rule
Click Forwarding Rule and the extended navigation menu is shown as follows:
The submenu contains Port Forwarding, Port Triggering, and UPnP.
6.5.1 Port Forwarding
By default, the firewall function of the router hides your LAN. As a result, other users on the Internet can
detect only the router, but cannot access a certain PC in the LAN directly. If you want to access a PC in a
LAN, you need to configure port forwarding on the router and map the desired port to the corresponding
PC in the LAN. After setting, after receiving an access request from the Internet, the router forwards the
packets to the PC according to the rule of port mapping. In this way, communication is successfully estab
-
lished between the Internet and the PC in the LAN.
Choose Forwarding Rule > Port Forwarding and the Port Forwarding page appears.
The following table describes parameters and buttons in this page:
Field
Description
Service Name
Select a service type from the drop-down list.
Service IP Address
Enter the IP address of the computer on which the service is to be provided.
Add
Click the button to add a service.
Service List
Display the information of configured services, including the service name, start
port, end port, and server IP address.