
Shenzhen Santone SilverCon
Email: [email protected]
Web: www.silver-con.com
Page: 34
SCW001 User Manual
The following table describes parameters in this page:
Field
Description
Enable Wireless
Router Radio
After it is selected, the WPS indicator on the rear panel of the router blinks. The
client can now connect to the router wirelessly.
Fragmentation Length
(256-2346)
Set the threshold of fragmentation length. If the length of a packet is greater than
the value, the packet is automatically fragmented into several packets. Because
too many packets lead to low performance of the wireless network, the value of
Fragmentation Length cannot be too small. The default value is 2346.
CTS/RTS Threshold
(1-2347)
Set the CTS/RTS threshold. If the length of a packet is greater than the value, the
router sends an RTS frame to the destination station to negotiate. After receiv
-
ing the RTS frame, the wireless station responds with a Clear to Send (CTS) frame
to the router, indicating that they can communicate with each other. The default
value is 2346.
Preamble Mode
Set the preamble mode. The default is Long preamble.
A preamble (especially the 802.11b High Rate/DSSS PHY field; 56 digits synchro
-
nized field for short preamble) defines the length of the CRC correction block for
communication between wireless devices. Shorter settings should be applied in a
network of intense traffics. Short preamble is mainly used to improve the efficien
-
cy of a wireless network for applications that have high requirement of real-time,
such as streaming video and voice-over-IP telephony.
Transmit Power Con-
trol
Set the transmit power of the router. The default is 100%, which indicates to
transmit full power.
Router’s PIN
To configure wireless settings of the router through WPS, you need to enter PIN
on the wireless client.
Enable WPS
Functions in the WPS Setup page are available only after this option is selected. If
this option is not selected, the WPS Setup menu item is greyed out.
Disable Router’s PIN
The PIN mode function in the WPS Setup page is available only after this option is
selected. If this option is not selected, the PIN mode option is greyed out.
Keep Existing Wireless
Settings
It determines whether WPS is configured on the router. If this option is not select
-
ed, newly added wireless clients changes the wireless settings of the router into
random SSID and security key that are automatically generated. You can select
this option in the Wireless Basic Settings page.