Shenzhen Santone SilverCon
Email: [email protected]
Web: www.silver-con.com
Page: 50
SCW001 User Manual
The submenu contains Remote Management and WAN Setup.
6.9.1 Remote Management
Choose Security Options > Remote Management and the Remote Management page appears.
The remote management function allows you to configure the router in the WAN through the Web brows
-
er. In this way, you can manage the router from a remote host.
The following table describes parameters in this page:
Field
Description
Turn Remote Man-
agement On
Enable or disable remote Web management.
Remote Management
Address
IP address that is used to access the router from the Internet. The default is
http://0.0.0.0:8080. When accessing the router, you need to enter the WAN IP ad
-
dress of the router, along with : and the port number in the address bar (of IE) or
the location bar (of Netscape).
Port Number
Specify the port of Web management for accessing the broadband router.
Allow Remote Access
By
Set the IP address of the computer on which remote Web management is carried
out to access the router.
• Only This Computer: Only the specified IP address can access the router. You
need to enter an IP address.
•
IP Address Range: A number of IP addresses on the Internet can access the
router. You need to enter the starting and ending IP addresses to specify the
range.
•
Everyone: Everyone on the Internet can access the router.
Metric
Indicate the number of other routers in the user network. Its value range is 2 to
15. Usually, the value of 2 or 3 leads to the best performance. If the route is direc-
tion connection, set the Metric to 2.