Shenzhen Santone SilverCon
Email: [email protected]
Web: www.silver-con.com
Page: 55
SCW001 User Manual
Click Erase to restore the factory default settings of the router. This action has the same effect of press
-
ing the Reset button on the rear panel for 3-6 seconds.
•
Reboot
Click Reboot to reboot the router.
Caution:
After a new configuration file is imported, the original configuration information of the router is lost.
Hence, it is recommended to back up the configuration before importing a new configuration file. If the
new configuration file is incorrect, you can import the previous backup file.
During a configuration file is loading, do not power off the router. Otherwise, the router may be damaged
and fail to work.
6.10.4 Set Password
Choose System Tools > Set Password and the Set Password page appears.
In this page, you can change the password of the administrator and set the time of page timeout.
The following table describes parameters in this page:
Field
Description
Old Password
Enter the password for logging in to the router.
Set Password
Enter a new password.
Repeat New Password Enter the new password again.
Web Idle Time Out
Settings
Set the time of page timeout. Its value range is 5 to 30 minutes. If you do not
operate on a page for a period longer than the set time after login, the system
switches to the login page when you try performing the next operation on a page.
After setting, click Apply to save the settings.