Silicon Graphics SGI Altix 3700 Bx2, User Manual

Page: 56 / 214

32 007-4377-002
2: System Control
001c05-L1>
entering console mode 001c05 console, <CTRL-T> to escape to L1
no response from 001c05 junk bus console UART:UART_TIMEOUT
When this time-out condition occurs, either the brick is hung or the subchannel is
incorrect. A brick is identified by its rack, type, and slot (001c05). The structure of the
brick location is as follows:
rrrbss.p
where:
rrr is the rack number.
b is the brick type.
ss is the slot location of the brick.
p is the partition of the brick (not present if the system is not partitioned).
R-bricks are not associated with a partition.
In the example shown above, 001c05 is a CR-brick in rack 001 and slot position 05.
Viewing Information, Warnings, and Error Messages
All information, warnings, and error messages generated by any of the system
controllers are in the following form:
001c05 ERROR: invalid arguments for ‘ver’ command, try “help ver”
The general format includes a brick identification and the type of message, followed by
the message. A message may be the result of an invalid command, as shown in the
example, or the result of tasks running on the L1, such as the environmental monitor.
Each L1 has a log of local events. Use the L1 command
log
to view events on any of the
L1s.