Silicon Graphics SGI Altix 3700 Bx2, User Manual

Page: 52 / 214

28 007-4377-002
2: System Control
Command Targeting
All commands entered affect only the local brick. You can target a command to all bricks
(including the local brick) by prefixing the command with an asterisk (
*
).
001c05-L1> * version
001c05:
L1 0.7.37 (Image A), Built 11/24/2004 14:59:42 [2MB image]
004i01:
L1 0.7.37 (Image A), Built 11/24/2004 14:59:42 [2MB image]
002c01:
L1 0.7.37 (Image A), Built 11/24/2004 14:59:42 [2MB image]
001x01:
L1 0.7.37 (Image A), Built 11/24/2004 14:59:42 [2MB image]
001c05-L1>
Viewing Information, Warnings, and Error Messages
All information, warnings, and error messages generated by any of the system
controllers are in the following form:
001c05 ERROR: invalid arguments for ‘ver’ command, try “help ver”
The general format of the message includes a brick identification (this is not present if the
command was to the local brick only), type of message, and the message. These messages
can be the result of an invalid command (as shown in the example) or from tasks running
on the L1, such as the environmental monitor.
Each L1 has a log of local events. Use the L1 command
log
to view the event on any of
the L1s.