Silicon Graphics SGI Altix 3700 Bx2, User Manual

Page: 189 / 214

L1 Controller Error Messages
007-4377-002 165
Temperature messages: low alt.
ATTN: <temp sensor description> advisory
temperature reached @ xxC xxF The ambient temperature at the brick’s air inlet
has exceeded 30
°
C.
ATTN: <temp sensor description> critical
temperature reached @ xxC xxF The ambient temperature at the brick’s air inlet
has exceeded 35
°
C.
ATTN: <temp sensor description> fault
temperature reached @ xxC xxF The ambient temperature at the brick’s air inlet
has exceeded 40
°
C.
Temperature messages: high alt.
ATTN: <temp sensor description> advisory
temperature reached @ xxC xxF The ambient temperature at the brick’s air inlet
has exceeded 27
°
C.
ATTN: <temp sensor description> critical
temperature reached @ xxC xxF The ambient temperature at the brick’s air inlet
has exceeded 31
°
C.
ATTN: <temp sensor description> fault
temperature reached @ xxC xxF The ambient temperature at the brick’s air inlet
has exceeded 35
°
C.
Temperature stable message:
ATTN: <temp sensor description> stabilized
@ xxC/xxF The ambient temperature at the brick’s air inlet
has returned to an acceptable level.
Power-off messages:
Auto power down in xx seconds The L1 controller has registered a fault and is
shutting down. The message displays every
five seconds until shutdown.
Brick appears to have been powered down The L1 controller has registered a fault and has
shut down.
Table 13-2 L1 Controller Messages (continued)
L1 System Controller Message Message Meaning and Action Needed