SILENT KNIGHT 9500, Installation And Operation Manual

Page: 21 / 162

Model 9500 Central Station Receiver Installation/Operation Manual
3-6 151059
3.6 Telephone Line Connection
See Figure 3-3 for the location of the phone line inputs. Connections to the 9810 phone jacks
are made with a standard 7-foot phone cord (provided with each 9810 and 9815 line card).
Use the following procedure to connect phone lines to 9810 and 9815 line cards:
1. Remove the cover of the 9500 receiver by loosening cover screws. (See Figure 3-4 for
cover screws locations.)
2. From the back side of the receiver insert the telephone line through the corresponding slot
for the desired line card. (See Figure 3-5 and Figure 3-6 for phone line slot locations.)
3. Gently push it all the way through to the front side of the receiver.
4. Plug the RJ-11 phone connector into the connector on the line card. (See Figure 3-5 and
Figure 3-6.)
Note: Use the tie wrap (P/N 120101 provided with each line card) on the tie wrap holder to add strain relief to
the telephone lines. See Figure 3-3.
5. Replace the cover of the 9500 receiver. (See Figure 3-4 for cover screws locations.)