Model 9500 Central Station Receiver Installation/Operation Manual
5-20
151059
ITI Options (Only Visible if ITI Gen or ITIComp Formats are Chosen)
These are options particular to the ITI automation format and can only be edited if one of
these formats is used to communicate with the automation computer. See
Automation
Communication Protocols Reference Guide
(PN 151393) for detailed information.
Follow these steps to set the ITI options:
1. Enter program mode. (See Section 5.1.)
2. Press
for General Options.
3. Press
for Communications.
4. Press
to set up automation configuration.
5. Press
until the ITI field is flashing.
6. Press
.
Note: ITI automation formats are covered in greater detail in Automation Communication Protocols Reference
Guide (PN 151393).
Table 5-6: ITI Automation Format Options
Option
Choices
Default
Description
Log Recs
Y (Yes)
N
Log records identify the time and date of a incoming report.
N (No)
XID
Y (Yes)
N
Extended panel Identification code. See
Automation Communication
Protocols Reference Guide
(PN 151393).
N (No)
SupCh
s
Supervisory Character is sent from the automation computer. The
receiver will respond with an OKAY or supervisory record. See
Automation Communication Protocols Reference Guide
(PN
151393).
No Data
0
Identifies the no data character in the log record.
Generic Rev
6.1 & 6.2
6.1
Summary of Contents for 9500
Page 7: ...Model 9500 Central Station Receiver Installation Operation Manual vi 151059 ...
Page 145: ...Model 9500 Central Station Receiver Installation Operation Manual 7 8 151059 ...
Page 155: ...Model 9500 Central Station Receiver Installation Operation Manual A 10 151059 ...
Page 161: ...151059 Index 4 ...
