SILENT KNIGHT 9500, Installation And Operation Manual

Page: 141 / 162

Model 9500 Central Station Receiver Installation/Operation Manual
7-4 151059
DC Input Low DC Input Low The backup battery is checked continually every
second. This message would be displayed if the
backup battery setting were set to “DC Bkp”. See
Section 5.4.4. Indicates a low when the voltage
drops to 10.2 VDC or lower. Check the connection
to the DC power
supply. Verify the
output from DC
power supply.
Msg Que >
Warning Message Queue
Warning When the message queue reaches the
programmed level mark, this message is given as
a pre-warning to “Message Queue Full”. See
Section 5.4.5.1 to program the % level at which
the receiver will indicate the warning. Verify that messages
are acknowledged to
any printers,
automation software,
and while in manual
mode.
Msg Que <
Warning Message Queue
Warning Restore This message is given when the message queue
drops below the programmed level after a
message queue warning indication has displayed.
See Section 5.4.5.2 to program the % level.
LC Run in
ROM Linecard Running
ROM Code The line card is not running the application code. Replace the line card.
Line Fault Line Fault The phone line voltage has dropped below the
threshold voltage as programmed. (See Section
5.5.2.5.) Check phone line
outlet and phone cord.
Line Fault
Restore Line Fault Restore Phone line voltage has been restored to normal
parameters.
Line Card
Deleted Line Card Record
Deleted A line card has been deleted.
Line Card
Added Line Card Record
Added A line card has been added.
User Log In User Log In: User # A user has logged on to the receiver.
User Log Out User Log Out: User # A user has logged off of the receiver.
Table 7-1: Error Messages
LC
Error
Sys
Error
LCD
Messages
Printer Message Description What to Do