SILENT KNIGHT 9500, Installation And Operation Manual

Page: 80 / 162

Programming
151059 5-15
5.4.3.2 How to set Com Port 1 Parameters
Set the baud rate, the number of data bits, number of stop bits, the parity, and the flow control
(see Table 5-4 for choice details).
1. Enter program mode. (See Section 5.1.)
2. Press for General Options.
3. Press for Communications.
4. Press to set Com Port1 parameters.
5. Press or until the display flashes on the desired port setting.
6. Press .
Note: See “How to Edit Init String” in Section 5.4.3.4.
7. Repeat steps 5 through 6 until all parameters are set.
8. Press to exit menu.
5.4.3.3 How to Set Com Port 2 Parameters
Set the baud rate, the number of data bits, number of stop bits, the parity, and the flow control
(see Table 5-4 for choice details).
1. Enter program mode. (See Section 5.1.)
2. Press for General Options.
3. Press for Communications.
4. Press to set Com Port2 parameters.
5. Press or until the display flashes on the desired port setting.
6. Press .
Note: See “How to Edit Init String” in Section 5.4.3.4.
7. Repeat steps 5 through 6 until all parameters are set.
8. Press to exit menu.