Programming
151059
5-39
Change the Maximum Handshake Wait Time
The wait time is the amount of time the receiver will wait for data from the reporting panel
before outputting the next handshake sequence. See Table 5-10 for valid entries.
1. Follow the procedure in Section 5.5.2.2.
2. Press
for handshake sequence menu.
3. Press
until the display flashes on the
Max Wait
field.
4. Enter the desired value from the keypad or press
or
to change the wait time.
5. When the desired wait time is flashing press
or
.
Change the Acknowledgment Tone Duration Time
The acknowledgment tone duration time is the amount of time the receiver will send an
acknowledgment tone to the reporting panel. See Table 5-10 for valid entries.
1. Follow the procedure in Section 5.5.2.2.
2. Press
for handshake sequence menu.
3. Press
until the display flashes on the
Ack duration
field.
4. Enter the desired value from the keypad or press
or
to change the acknowledg-
ment tone duration time.
5.5.2.4 Pulse Format
Select how this line card will handle pulse formats.
Select Which Format a 5-digit Pulse Format will be Received As
1. Follow the procedure in Section 5.5.2.2.
2. Press
for pulse format menu.
3. Press
until the display flashes on the
5-digit Fmt
field.
4. Select the format by pressing
or
.
5. When the desired wait time is flashing press
or
.
Summary of Contents for 9500
Page 7: ...Model 9500 Central Station Receiver Installation Operation Manual vi 151059 ...
Page 145: ...Model 9500 Central Station Receiver Installation Operation Manual 7 8 151059 ...
Page 155: ...Model 9500 Central Station Receiver Installation Operation Manual A 10 151059 ...
Page 161: ...151059 Index 4 ...
