SILENT KNIGHT 9500, Installation And Operation Manual

Page: 102 / 162

Programming
151059 5-37
5.5.2.3 Handshake Sequence
Each line card is intelligent enough to determine what format is being sent from a reporting
panel. You only need to program the handshake order and parameters for each line card
(Figure 5-11). A line card will initiate up to four different types of handshake tone groups. The
order in which the receiver sends out these handshake signals can be changed in this program
location for each line card. Table 6-1 in Section 6 lists the proper handshake to use for the type
of communication format you are using with a panel.
Figure 5-11 Handshake Sequence Menu
About the Handshake Sequence
The handshake sequence sets the order in which the receiver will send out handshakes. The
default settings for each handshake sequence number is shown in Table 5-10. See Table 5-9
for ranges. The following sections describe how to change the handshake order and the
parameters associated with the handshake.
Table 5-10: Handshake Format Group Default Settings by Line Card Model
Line Card
Model
Seq #
Handshake
Group
Handshake
Duration*
Max Wait
†
Acknowledge
Duration*
9810
1 2225 Hz 090 064 075
2 1400_2300-2 010 010 080
3 2300 Hz 100 064 100
4 1400 Hz 100 064 100
5 Westec 063 064 026
6 ModemII 100 064 075
9815
1 2225 Hz 0900 3200 0750
2 1400_2300-2 0100 1250 0800
3 2300 Hz 1000 3200 1000
4 1400 Hz 0630 3200 1000
5 Westec 0630 3200 0260
6 ModemII 064 3200 0600
Notes below apply to the 9810 line card only. 9815 line cards display the actual time in msec.
* Each numeric option is 10 times the displayed value. Example–064 X 10 = 640 msec.
† Each numeric option is 50 times the displayed value in the Max Wait field. Example–004 X 50 = 200 msec.