Silca Triax Quattro, Operating Manual

Page: 74 / 118

Operating Manual - English Triax QUATTRO
- 66 - Copyright Silca 2011
1
The message indicates that neither SILCA or the user has
created an engraving model for the key blank selected.
ATTENTION
No engraving model has been
created for the selected key
blank
ATTENTION
Models have been modified by
the User: by proceeding all
changes will be lost
STOP=Cancel ENTER=Continue
The procedure for loading user engraving models from a
USB PEN overwrites all the user models stored on the
machine. Editing of the text or the text position will be
lost.
To keep the edited templates stored on the machine use
the SKP program or the Free Engraving program provided
with the machine.
ATTENTION
This operation will overwrite
all User models previously
saved in the machines memory.
Not to lose any changes made
to the User templates, please
use the Silca Key Programs to
transfer the engraving models.
The text inserted on the LINE shown at the end of the
message is outside the set rectangle (or area). Reduce
the number of characters or increase the width of the
rectangle.
ATTENTION
Entered text exceeds maximum
area that is reserved for
engraving!
See row:
The OPTIONS menu can be used to choose which makes
of cylinders to search through for a lock system (SSN) by
key blank, code, description, etc. If by mistake all the
makes are disabled the search will give no results.
ATTENTION
Select at least one MFG!
[ENTER]