Silca Triax Quattro, Operating Manual

Page: 70 / 118

Operating Manual - English Triax QUATTRO
- 62 - Copyright Silca 2011
1
5.12 OPTIONS
From the initial screen press MENU and then F3 to enable the function.
There are 4 machine option windows to select by pressing F1.
Hold down F4 to retrieve the original parameters set by Silca S.p.A.
Machine parameters/options that can be forced to the original manufacturer’s value:
Rapid velocity: 5000
Measuring unit: millimetres
Date format:
DD/MM/YY
Time format: 0-24
Keypad inversion: NO
Quick menu:
NO
Use Tracer Tower: YES
Make preselection: ALL
5.12.1
MACHINE OPTIONS [PAGE 1/4]
The display shows: Preferences
Current language : use the arrow keys (r/h-l/h) to select the
required language, then press ENTER to confirm.
Measuring unit : use the arrow keys (r/h-l/h) to select the
required measuring unit (mm=millimetres, inch.=inches), then
press ENTER to confirm.
Quick menu : if enabled (=YES) used in heavy operating flows to
skip some of the steps and speed up the required procedure.
Keypad inversion : function normally disabled: use the arrow
keys (r/h-l/h) to select your choice (YES or NO) then press ENTER
to confirm.
This operation is used to invert the function of the
alphanumerical keys.
“Keypad inversion” disabled:
to digit number 3: press 3/K
to digit letter K: press SHIFT + 3/K
“Keypad inversion” enabled:
to digit number 3: press SHIFT + 3/K
to digit letter K: press 3/K
Use Tracer Tower:

if the Tracer Tower is enabled (=YES) the program will
always give instructions to position the Tracer when
necessary and will oblige the user to employ the tracer
point only in special cases of exceptional sizes that
cannot be managed.

If the Tracer Tower is disabled (=NO) the program will
check that it is in the up position (safe) and will give
instructions to fit the appropriate tracer point for the
type of key.