Silca Triax Quattro, Operating Manual

Page: 103 / 118

Operating Manual - English Triax QUATTRO
Copyright Silca 2011 - 95 -
8
DECOMMISSIONING
To decommission the machine it must be made unusable by:
1. deactivating the power supply;
2. separating the plastic parts from the metal parts;
3. removing the lithium battery from the electronic circuit board.
Dispose of the lithium battery in the special collection containers (see chap.7.17)
After doing the above, dispose of the waste in compliance with the current directives in the country where the
machine is located.
Waste disposal
CEE regulations lay down special methods for disposing of waste (**).
Machine
Triax QUATTRO is not only a durable machine, but is also re-usable.
Recycling is a good environmentally friendly practice.
Packing
The packing in which the Triax QUATTRO machine is transported is made of cardboard and wood and may
therefore be recycled as packing if unbroken, or as fuel for burning (wood-fuelled heat production) if
disassembled.
Attention! When disassembling the crate, pay attention to the nail tips as these remain exposed. Beat them
down with a hammer so they are bent into the wood and made harmless, or remove them completely and put
on one side to be disposed of in an authorized scrap yard.
Packing is considered solid urban waste and should not be thrown out but taken to a special collection centre.
Waste from key-cutting
Residue deriving from key cutting is classified as special waste, but can be included in solid urban waste (SUW)
as metaI scourers. This waste must be disposed of in the special collection centres according to its classification
by current laws in Italy and the European Union. If it is contaminated or contains harmful-noxious substances
which transform the metal residue included in SUW into harmful-noxious substances, it is included in the lists of
the appendices to current regulations in Italy and the European Union for waste disposal.
INFORMATION TO USERS
Under the terms of art. 10 of Directive 2002/96/CE dated 27/01/2003
regarding waste from electric and electronic equipment (WEEE),
The symbol shown above is also attached to equipment and indicates that it has been placed on the market and must
be separated and disposed of when no longer wanted (including all components, sub-assemblies and consumables
that are an integral part of the product).
Please contact SILCA S.p.A. or any other subject on the national registers of other countries in the European Union for
information about waste disposal systems for the equipment. Household waste (or of similar origins) can be disposed
of by the separate urban waste collection system.
When purchasing new equipment of an equivalent kind the unwanted equipment can be given back to the dealer.
The dealer will then contact the authority responsible for collecting it.
Separate waste collection of unwanted equipment and its forwarding to treatment, recovery and environmentally
friendly disposal makes it possible to avoid potential negative effects on the environment and human health, and
assists recycling and recovery of materials.
Unauthorized disposal of the product by the user is punished by the application of fines established by the countries
which have received Directives 91/156/CE and 91/689/CE.
(**) wastes are substances or objects deriving from human activity or natural cycles which are discarded, or
intended to be discarded.