Silca Triax Quattro, Operating Manual

Page: 73 / 118

Operating Manual - English Triax QUATTRO
Copyright Silca 2011 - 65 -
6 Triax QUATTRO MESSAGES
6.1 WARNINGS
The key cannot be cut if the combination entered is not
complete. This is a feature of keys for vehicles.
ATTENTION
Cutting combination not
complete!
Please enter all cuts.
To use the TRACER TOWER to decode it must be enabled.
Check the setting in the OPTIONS menu and choose YES.
ATTENTION
TRACER TOWER disabled!
Verify the settings in the
OPTIONS menu
The selected series can be used only by entering a valid
indirect code. The cut insertion function is not accessible.
ATTENTION
An indirect code is needed to
access the series.
Do you want to proceed?
No=STOP Yes=ENTER
ATTENTION
The jaw is not calibrated!
By pressing ENTER you can only
consult the cards data
The messages warn the user that to cut a key with this
series a different clamp must be fitted, or the clamp
involved must be calibrated. This operation must be
performed before using the series. Press ENTER to
consult the series data, but without cutting the keys.
ATTENTION
In order to use the series the
jaw needs to be removed.
Pressing ENTER you can only
consult the cards data
The message appears when data is loaded onto the
machine by a USB-PEN older than those in the machine
memory.
ATTENTION
An older data version has been
detected on the USB PEN:
do you still want to continue?
No=STOP Yes=ENTER