Device description
TP17 / TPM
- 6 -
© SIKA • Ba_TP17-TPM_en • 01/2016
1.1
Delivery, unpacking and accessories
All units have been carefully checked for their operational reliability before shipment.
Immediately after receipt, please check the outer packaging for damages or any signs of
improper handling.
Report any possible damages to the forwarder and your responsible sales
representative. In such a case, state a description of the defect, the type and the serial
number of the device.
Report any in-transit damage immediately. Damage reported at a later date shall not be
recognized.
Unpacking:
Carefully unpack the unit to prevent any damage.
Check the completeness of the delivery based on the delivery note.
Save the packaging!
Temperature calibrators are delivered in special protective packaging.
Save the packaging for returning the instrument safely to the manufacturer for
recalibration or repair.
Scope of delivery and accessories (included):
Metal block calibrator:
Micro bath:
Metal block calibrator according to order
data.
Mains cable.
Sleeve exchange tools.
TF… reference sensor (only for …-U types)
Test certificate.
Operating manual.
Protective packaging and transport
protection.
Micro bath calibrator according to order data.
Mains cable.
Seal cover.
Work cover with five silicone plugs.
Sensor cage.
Magnetic stirrer.
Magnetic lifter.
Drain pump.
TF… reference sensor (only for …-U types)
Test certificate.
Operating manual.
Protective packaging and transport protection.
IMPORTANT!
Use the type plate to check if the delivered unit corresponds to your order.
In particular, for devices with electrical components, check to see if the correct power
supply voltage is specified.
