Technical data
TP17 / TPM
- 50 -
© SIKA • Ba_TP17-TPM_en • 01/2016
10
Technical data
The technical data of customised versions may differ from the data in these instructions.
Please observe the information specified on the type plate.
10.1
Shared characteristics
Series
Characteristics
TP 17 …
TP 17 … S
TP M … S
Calibrator
Influence of the operating
temperature (0...50 °C) to the
accuracy
+/- 0.02 °C/°C
Detection speed
130 ms
Control sensor
Internal • External (only S-U)
Display
Resolution
0.1 °C
0.01 °C (-9.99 … 99.99), or 0.1 °C
Display unit
°C or °F (optional)
Two-line display:
-
Reference temperature
-
Target temperature
4-digit, 7-segment LED, 7mm high
red = upper display, green = lower display
Display for sensor break
- - - -
Electrical characteristics
Degree of protection
IP 20
Block temperature control
via PID-controller
Controller outputs:
-
Heater control
-
Cooler control
-
Fan control
voltage output for control of the solid state relay (8 mA/ 8 V
DC
)
voltage output for control of the solid state relay (8 mA/ 8 V
DC
)
relay SPDT (8 A-AC1, 3 A-AC3 / 250 V
AC
) 100,000 switching cycle
Sensor break behaviour
the control is switched off
Excess temperature behaviour
temperature fuses interrupt the power supply if there is excess
temperature inside the housing
Ambient conditions
Operating temperature
0…50 °C
Transport and storage
temperature
-10...60 °C
Humidity (RH)
30…95 % (non-condensing environment)
Operating conditions:
-
Location • Altitude
-
Operating position
Interiors • up to 2000 m
Standing upright/vertically
