41
Wireless Direct Mode
After Factory Reset, WMS base unit starts up in the
default Stand-Alone “Wireless direct mode”
configuration, where the Base-unit creates its own wireless access point, which all transmitters use to
connect. This is typical for a quick setup for small group meetings. The Wi-Fi icon
for the “Wireless
direct mode” is displayed in top status-bar of Home screen.
Guest
connect to the access-point of Klick &
Show, while
Staff
can also connect to Base-unit via Wi-Fi or via LAN connection to their corporate network.
Stand-Alone Connection
The internal Wi-Fi access Point of WMS is active
. The dongle is paired directly to it. Guest and Staff use
the internal Wi-Fi access point of Base-unit to present with all their units.
No Internet access is required.
The LAN-Port of Base-unit is not connected. The PC-users can present with or without dongle by
WirelessMedia PC driver (Windows or MacOS). Android users (BYOD) can share their content by installing
the free APP on their device and IOS users can use AirPlay (Apple only).
Recommended Environment
This option is best for temporary operation, small installations, and rooms without network access or
networks
that do not allow network access for Guests, due to strict security concerns, and are completely separate
from the corporate network.
Under this mode, dongle will be automatically paired to the base unit Wi-Fi hotspot when plugging dongle
to the base unit USB port for pairing.
You can start using WMS in this mode without any other wireless network configuration.
