22
Enable portable hotspot:
Check the SSID and PASS (Password) are shown on the Homepage, as shown below.
Enable LAN connection:
Be sure the WMS is connected to the Network. When
Local IP
shows an active IP address, such like
192.168.3.32, it indicates WMS is successfully connected to the LAN and get an appointed IP address.
Note:
When it shows “N/A”, means the WMS is not connected to the LAN (Local Area Network) by CAT cable or
it failed to get an available IP address by the corporation router.
Please refer to the LAN-settings in Ethernet, as below.
Default password for entering the Main menu on webserver console is “admin”.
