24
4.
After completing the pairing, the message table shows “Succeeded to pair!” on the home page, as
shown below. Then, please un-plug the transmitters and use it for the mirroring on your laptop.
If error-message “Configuration fail” is shown, please check the connection of USB/type C to keep stable
after plug-in, and try again.
Note:
After each changing the SSID/Wi-Fi channel in menu, all the transmitters must be paired again!
When you buy additional transmitters or when a transmitter should be assigned to another Base-unit, the
transmitter must be paired again.
A transmitter can only be paired to one Base-unit at a time. The transmitter will always make connection to
the Base-unit it was last paired to.
