52
HINT
•
The printer can print or receive data while charging by the printer and AC adapter.
During printing, POWER LED displays the battery remaining capacity continuously and
the printer pauses to charge.
After printing is completed, the printer restarts charging, and the light of POWER LED
changes to orange.
In case that the printer performs printing or receiving data during the normal charging, the
power is not shut off automatically.
•
To stop charging, press the power switch.
To charge the battery pack again, press the power switch again.
In case of the long life charging, when the battery remaining capacity is recovered to
battery level 1 at the time of restart of charging, the charging is stopped.
•
In case of restarting charging the above procedure during the normal charging, the
charging method is changed to the long life charging, and therefore the power is not shut
off automatically. To restart the normal charging, turn off the printer, unplug the AC plug of
the AC adapter from an outlet, and plug it again.
•
The charging time depends on the ambient temperature and the voltage level of the
battery pack. Normally, it takes about 4 hours to charge after running down a battery
pack.
•
The AC adapter may get hot when in use. This is normal and not a malfunction.
