39
Wireless LAN Communication
(1)
When the USB interface cable is connected to the printer, disconnect it from the printer.
(2)
Turn on the printer and connect with the host device by wireless communication.
At the factory shipment, the function settings are as follows:
Mode
: Simple AP (simple access point)
Communication Standard
: 802.11b/g/n (2.4GHz frequency range)
SSID
: SII-Printer
Security
: None
DHCP Server
: Enable
Printer IP address
: 192.168.0.1
(3)
View the page "http://192.168.0.1" from the Web browser.
The printer setting screen is displayed, and set these values.
These values are enabled after rebooting.
(4)
Check the communication status from the host device.
(5)
Send data from the host device, and verify that the data is printed correctly.
WARNING
◆
The printer may affect medical or other electronic devices. Obtain information and data
concerning influence due to radio interference from the respective manufacturers or
dealers.
◆
When using the printer in medical institutions, follow their guidelines.
◆
DO NOT use the printer in any area or district where its use is prohibited.
