Instruction Manual StackGuard
14
10266E/1
3.6
Installation of the insulation shells
Pos. Name
1
Purge air heater
2
Measuring cell outlet
Figure 12: Insulation shell position
Action Remarks
1.
Attach the two insulation shells at positions (1)
and (2) on the photometer.
The insulation shells consist of two parts
that are placed around the tube pieces and are
held together by means of quick-release locks
(see figure).
→
3.7
Installation of the control unit
The control unit can be installed directly on the wall, in a built-in grill, or on an
instrument stand.
The length of the standard cable is 5 m. The control unit can therefore be
positioned directly near the photometer if required.
Figure 13: Control unit position with standard cable
SIREL installation
Distance
up to 5 m