Instruction Manual StackGuard
2
10266E/1
1.3
Intended use and conformity
Use of the photometer for purposes other than those for which it was
designed can produce incorrect measuring results, possibly with process-
related consequential damage or even damage to the photometer itself!
The photometer is designed for the measurement of particles in gaseous,
nonexplosive media up to 170° C.
The photometer is assembled and configured at the factory for the
measurement duty specified by the user. The duty is specified with a
questionnaire that is an essential tool for defining the measuring system’s
intended use.
State-of-the-art rules of engineering practice were observed in the design and
manufacture of the measuring system. They comply with the usual directives
relating to safety and the obligation to exercise due care.
The dust concentration monitoring instrument meets the requirements
applicable within the European Union (EU):
Electromagnetic Compatibility (EMC)
Low Voltage Directives (LVD)
Standards for the safety of laser installations IEC 60825 1:2001
EN 14181:2004 and DIN EN ISO 14956
Therefore the photometer carries the CE mark.
Intended use
