Instruction Manual ColorPlus Ex
10210E/5
55
6.4
Information
The ColorPlus Ex provides information messages in the case of automatically
executed configuration changes:
Message
Signifies
Causes
Caution!!
MR changed
One or more measuring
ranges has been
automatically adapted
One or more measuring
ranges has been adapted
because it lies outside
the maximum
permissible extinction of
3E (
Reference
Handbook)
Caution!!
Tab. changed
The table has been
automatically adapted
The automatic
adaptation of the
measuring range
prompted a table
adaptation (
Reference
Handbook)
Caution!!
Scal. changed
The scaling was adapted
automatically
The automatic
adaptation of the
measuring range
prompted a scaling
adaptation (
Reference
Handbook)
6.5
Customer service information
Whenever you have questions about SIGRIST products, please start by reading
the documentation supplied with the equipment. Also check the Errata
accompanying the documentation. These contain information that became
available subsequently.
If you do not find the answer, please contact the Service Office responsible for
your country or your region. If you don’t know where to find it, Customer
Service of SIGRIST-PHOTOMETER AG in Switzerland will gladly give you the
relevant contact address.
You will also find the current list of all SIGRIST country representatives in the
internet at www.photometer.com.
When you contact a SIGRIST Service Office or Customer Service, please make
sure you have the following information at hand:
The serial number of the control unit (
Section 1.5).
A description of the instrument behavior and the worksteps being
performed as the problem arose.
A description of how you proceeded when trying to solve the problem
yourself.
Documentation on any non-SIGRIST product operated together with the
photometer or its peripheral devices.
