Instruction Manual ColorPlus Ex
10210E/5
51
Action
Remarks
4.
Pull the UV light source’s plug (A) out of the
circuit board.
5.
Loosen the fastening screw (B) of the UV light
source.
6.
Don’t touch the glass of the UV bulb with
your fingers! Clean it with alcohol before
installation!
Withdraw the UV bulb (C) from its base.
7.
Insert the new UV bulb (C) into the socket all
the way to the stop (the mark on the bulb
must line up with that on the socket) and
tighten the fastening screw (B). Reinsert the
plug (A) into the circuit board.
8.
Reassemble the photometer in the reverse
order and restart it.
9.
Carry out a 100% adjustment as directed in
Section 5.2.
