Instruction Manual ColorPlus Ex
34
10210E/5
Action
Display (example)
Remarks
9.
Assign functions:
/
Function
on/off
/
Change func-
tion
Relay 2
>li AL se wa in<
li = Limit 2
exceeded
al = Alarm (fault
has occurred)
se = Instrument in
service mode
wa = Warning
(warning
situation has
occurred)
in = Relay inverted
Functions in CAPITAL
LETTERS are activated
(e.g. AL).
10.
Confirm selection with
.
> Relay 2 <
li AL se wa in
11.
+
(together)
K1 68.2 E/m
K2 85.8 %T
Instrument in normal
operation.
After the relays have been configured, it is necessary to set the limits
(
Section 4.8).
4.8
Set the limits
Up to two limits can be
programmed, each with an upper
and a lower threshold value
(
Figure 23: Upper and lower
thresholds of a limit.).
If the reading reaches the
upper
threshold
, the limit becomes active
and remains activated until the
reading drops back below the
lower
threshold
.
Figure 23: Upper and lower thresholds of a
limit.
The limits are available only if the relay has been so configured
(
Section 4.7).
