SignWarehouse.com Vinyl Express Qe6000, User Manual

Page: 62 / 246

2-38
Adjust the Blade Length (Automatic Height Adjust)
Test cutting must be performed several times in order to confirm the optimal blade length setting. However, if the
blade length adjustment function is used, the optimal length can be easily set.
Operation
1
Load the media for test cutting in the plotter.
2
Press the POSITION (
) key the tool carriage to the
location you wish to perform the blade length adjustment.
Supplement
Perform the settings in Normal mode.
3
Press the [COND/TEST] key in the default screen.
CONDITION setting screen (1/3) is displayed.
4
Press the POSITION ( ) key.
CONDITION setting screen (3/3) is displayed.
5
Press the [3] key (BLADE ADJUST).
Message prompting to turn the blade-length adjustment knob is
displayed.
Supplement
See "Structure of Cutter Plunger"
P.2-2
for
bladelength adjustment knob.
6
As instructed, turn the blade length adjustment knob to the
left to fully retract the blade.
Blade