manualshive.com logo in svg

SignWarehouse.com Vinyl Express Qe6000, User Manual

The Vinyl Express Qe6000 by SignWarehouse.com is a top-of-the-line vinyl cutter perfect for professional sign makers. For detailed instructions on how to use this machine, be sure to download the free user manual from our website. Master your craft with ease using the comprehensive manual provided.

Share
Download
background image

10-6

Related to Plotter Environment

Fan Suction Setting (FAN POWER)

This function sets the suction force used to affix media to the plotter.

 

It may not feed properly if the media is thin, so decrease the suction force.

Operation

Supplement

Perform the settings in Normal mode.

  1 

Press the [PAUSE/MENU] key in the default screen.

 MENU screen is displayed.

  2 

Press the POSITION ( ) key (ADV.).

 ADVANCE setting screen (1/2) is displayed.

  3 

Press the POSITION ( ) key.

 ADVANCE setting screen (2/2) is displayed.

 

  4 

Press the [2] key (FAN POWER).

 FAN POWER setting screen is displayed.

  5 

Press the [1] key (NORMAL) or the [2] key (WEAK).

  6 

Confirm the setting and press the [ENTER] key (SET).

 Setting will be set, and it will return to ADVANCE setting screen (2/2).

  7 

Press the [PAUSE/MENU] key.

 It will return to the default screen.

Summary of Contents for Vinyl Express Qe6000























































































































































































































































Reviews:

No comments

Related manuals for Vinyl Express Qe6000

LPKF S104 Manual preview
S104
Brand: LPKF Pages: 54
Artistic Edge 12 User Manual preview
Edge 12
Brand: Artistic Pages: 32

Brands by name

Popular brands

Load more brands