manualshive.com logo in svg

SignWarehouse.com Vinyl Express Qe6000, User Manual

The Vinyl Express Qe6000 by SignWarehouse.com is a top-of-the-line vinyl cutter perfect for professional sign makers. For detailed instructions on how to use this machine, be sure to download the free user manual from our website. Master your craft with ease using the comprehensive manual provided.

Share
Download
background image

5-18

Setting Offset Between the Registration Mark and Cutting Origin Points

You can set the cutting point after the registration mark is read. 

The default offset for the registration mark is 0.0 mm on X and Y, and can be changed to any point from -1000.0 

to +1000.0 mm (-39.37 to +39.37 inch).

Fe

ed d

ire

ct

io

n o

f m

ed

ia

Moved origin point (Cutting Point)

X offset

Y offset

Registration mark (point 1)

Origin point after registration mark is read

Operation

Supplement

Perform the settings in Normal mode.

  1 

Press the [PAUSE/MENU] key.

 MENU screen is displayed.

  2 

Press the [2] key (ARMS).

 ARMS SETTING screen (1/4) is displayed.

  3 

Press the POSITION ( ) key.

 ARMS SETTING screen (2/4) is displayed.

Supplement

It will return to ARMS SETTING screen (2/4) 
without changing the settings when you press 
the POSITION ( ) key (CANCEL).

  4 

Press the [4] key (AXIS ORIGIN OFFSET).

 AXIS ORIGIN OFFSET screen is displayed.

Summary of Contents for Vinyl Express Qe6000























































































































































































































































Reviews:

No comments

Related manuals for Vinyl Express Qe6000

SONOPLOT MICROPLOTTER Proto Manual preview
MICROPLOTTER Proto
Brand: SONOPLOT Pages: 67

Brands by name

Popular brands

Load more brands