SignWarehouse.com Vinyl Express Qe6000, User Manual

Page: 139 / 246

5-37
Adjust with 3POINTS
3POINTS adjustment will scan 3 registration marks as shown below, where the adjustment is done measuring
the tilting of the X and Y axes and the distance between the registration marks (horizontal and vertical
directions). This adjustment is called 2 axis adjustment (tilt adjustment).
If the loaded media is tilted as shown below, position of the scanned registration mark is shifted from the position
where it should be. Tilt and distance can be adjusted by comparing these coordinate values.
Fe
ed d
ire
ct
io
n o
f m
ed
ia
Second registration mark
Tilt
Original registration mark position
Difference in X
First registration mark
Difference in Y
Third registration
mark
Tilt
Difference in Y
Original registration
mark position
Difference in X
Operation
Supplement
See "Loading Media (Paper or Marking Film)"
P.2-6
for loading the media.
1
Load the media with registration marks (3POINTS) plotted.
2
Set the MARK SCAN MODE to ARMS, and POINTS to
2POINTS.
P.5-7 Setting MARK SCAN Mode and Numbers
Supplement
It is not necessary to set the MARK DISTANCE
when it is adjusted manually.
3
Set the shape and size of the registration mark, mark
distance, distance adjust mode, offset, paper-weight, sensor
level, scan position adjustment, etc., as needed.
P.5-11 Setting Shape (Pattern) of Registration Mark
P.5-12
Setting Registration Mark Size
P.5-14 Setting Mark Distance
P.5-16 Setting Distance Adjustment Between the
Registration Mark
P.5-18
Setting Offset Between the Registration Mark and
Cutting Origin Points
P.5-20 Adjusting the Sensor Level
P.5-22 Manually Adjusting the Sensor Level (Threshold
Value)
P.7-14 Setting Paper-Weight