Signature 1100R+, User Manual

Page: 7 / 83

3 Setup
Setting up the Tester
1. Connect the power supply and
power cord together, and plug
the tester into a grounded power
outlet.
The power supply is capable of
accepting line voltages of either
120 VAC 60 hertz or 240 VAC 50
hertz.
2. Connect the probe to the tester.
3. On the back of the 1100R+
tester you will find two USB
ports. If desired, insert the
thumb drive into either port for
access.
Note: Although not required, a thumb drive allows extra storage capacity and test program
mobility. A thumb drive is required to set up a network. For more information, see USB Thumb
Drive on page 23.
4. Turn on the tester and make sure
the main menu is displayed.
Note: If connecting either a printer or Scanner Add-ons, see the applicable sections that follow;
otherwise, skip to Tester Basics on page 8.
These digits may be different, but the
main screen should look similar to
this.
SIGNATURE 1100R+
Set Preferences
Set Up Test Program
TEST: 1B4137-4Z020
Probe
Well grounded
power is essential
for the tester to
operate accurately.
Power
Supply
Power
Cord