64
Tester
Configuration
The Security Manager tab
When the
1100 Utilities
Application
opens, the
Security Manager
tab is active. The boxes
with a check mark
consist of the tester’s present security settings.
Tester
Status
Features
affected by
Security
Group
settings
Load and
Save
security
profiles
Transfer a
profile to
and from the
analyzer
To change the security settings:
Select or deselect the checkboxes for the security settings you wish to be on the tester.
Click
Save To Tester.
If you want to review the settings that have been saved to the tester, click
Load From Tester.
If you should want to duplicate the security settings later, click
Save To File
to save the setting
information on the computer you are using. Click
Load From File
to access previously saved
security settings.
The Option Manager tab
When you click the
Option Manager
tab, you can see the tester serial number recorded in the
tester’s hardware. To enable scripting, enter the enable key you obtained from Cirris when
scripting was purchased, and click
Send To Tester.
The
Option Manager
window should
update to show
Script
under
Enabled Features.
Summary of Contents for 1100R+
Page 1: ...Version 2011 1 0 November 10 2011 1100R User s Manual...
Page 28: ...24 Using the Tester...
Page 78: ...Connections continued Net Test Points Components...
Page 79: ...Notes...
