Signature 1100R+, User Manual

Page: 26 / 83

22
Using the
Tester
Test Summaries
A test summary displays the results of a batch of tested cables.
To Display a Test Summary:
1. Test a good cable.
2. Scroll down.
3. Press
Get Summary Count.
This screen shows the total number of tested
cables, the number of bad tested cables, and
the number of good tested cables.
If you have a printer connected:

Press here to print the test
summary.
The printed test summary shows the cable
signature, parameter signature, cable serial
number, parameter settings, adapter
connections, and cable counts for a batch of
tested cables. If desired, attach the printed
test summary to a batch of tested cables to
substantiate the test results of the batch.
Note: You can change the format of the Test Summary to display the count for good cables only.
For more information, see Test Count on page 38.
Clearing or Resetting a Test Summary:
When you finish a run of cables, and have the
summary data you need, press
STOP TEST
RUN to complete the run. The summary
counts (Total, Good, and Bad) will be reset to
0 in preparation for another run.
Probing the Pins
The probe helps determine the pin count,
identify flying leads, and locate cable errors.
When you probe a point in a net, the tester
initially displays up to six test points of the net.
For large nets, you may have to scroll down to
view all points of the net.
PASSED ALL TESTS
Remove Cable
STOP TEST RUN
START NEW TEST
PASSED ALL TESTS
Remove Cable
STOP TEST RUN
START NEW TEST