40
Low Voltage
Settings
Low Voltage Settings
Learn and Test Parameter Settings
Learn Settings affect the way the tester learns a cable. After you learn a cable, the Learn Settings
become the Test Parameter Settings
for that cable, which determine how a cable is tested.
Changing Learn Settings
1. From the main menu, press
Set Up Test Program.
2. Press
Create New Test
.
3. Press
Set Learn Settings.
4. Select the appropriate category of Learn
Settings.
5. Select the specific Learn Setting
you want to change. You may
need to scroll down to see all
settings in the category.
6. Set the desired value for the Learn
Setting. Some Learn Settings toggle
between two values, and others scroll
through a range of values.
7. Press
ACCEPT
or back to exit the
specific Test Setting.
8. Press back to exit the category of Learn
Settings.
9. Press back to exit the SET LEARN
SETTINGS menu.
Note:
If you purchased SPC Data Collection, you can apply it to all learned tests it from the SET
LEARN SETTINGS screen or to a single test from the EDIT screen, see
“SPC Data Collection” on
page 67.
Low Voltage
Settings
SET UP TEST
Create New Test
Load Test
EDIT: 39E92F-4Z020
SIGNATURE 1100R+
Set Preferences
Set Up Test Program
TEST: 39E92F-4Z020
SET LEARN SETTINGS
Set Res Thresholds
Set Components
Set Up SPC
Summary of Contents for 1100R+
Page 1: ...Version 2011 1 0 November 10 2011 1100R User s Manual...
Page 28: ...24 Using the Tester...
Page 78: ...Connections continued Net Test Points Components...
Page 79: ...Notes...
