Signature 1100R+, User Manual

Page: 22 / 83

18
Using the
Tester
You’ve created a test program!

Press the back button to return
To the CABLE LEARNED menu.

Remove the sample cable

You are ready to:
Save the learned test in memory
OR
Start testing.
Learning a Cable With No Connections
A test program can be created without connections by learning when no connections are present.
This is useful when testing assemblies such as connectors or single-ended cables.
1. Install the correct adapters.

Remove the J3-J4 cover plate.

Install the correct adapters.

Replace the cover plate.
2. Learn the test setup.

From the main menu, press
Set Up Test Program.

Press Create New Test.

Press LEARN.
3. Verify that there are no connections.

Press CONTINUE LEARN.
4. The test program is ready for use.

Save the learned test
OR
Start testing
CABLE LEARNED
Verify Test
Save Test
TEST: 39E92F-4Z020
At least one
adapter must be
installed to learn.
WARNING!
No Connection(s)
Found
CONTINUE LEARN
CABLE LEARNED
Verify Test
Save Test
TEST: 39E92F-4Z020
SIGNATURE 1100R+
Set Preferences
Set Up Test Program
TEST: 39E92F-4Z020