Signature 1100R+, User Manual

Page: 10 / 83

6 Setup
5. Remove the plastic cover piece on the
side of the tester.
6. Carefully place the scanner assembly
back into the tester.
Make sure the Add-on connector
sticks out to the side of the tester.
7. Mate the Add-on connectors; make
sure they are fully connected.
8. Push the connectors into the main
unit.
To remove the plastic rivets
holding the cover piece,
use a
screwdriver or a hard flat object
to push in the rivet, and then
remove the rivet.
Cover Piece
Add-on Connector
Scanner Assembly
Scanner Add-On