50
Component
Setting & Test
Turning 4-Wire Testing on in the Tester
Before learning a 4-wire fixture and tested assembly, you must turn on the 4-wire capability in
the
Set Lrn Components
menu.
1. From the main menu, press
Set Up Test Program.
2. Press
Create New Test.
3. Press
Set Learn Settings.
4. Press
Set Components.
5. Scroll down, and press
4W Kelvin.
Probing for Test Points Type
With 4-Wire testing turned on, you can probe a
test point to determine whether it is a type 1 or
a type 2 test point. When you probe a point,
the probe type displays as shown.
1. From the main menu, press
Set Up Test Program.
2. Press
Create New Test.
3. Press
LEARN.
4. Scroll down, and press
Probe 4W Point Type.
Learning a 4-Wire Test Setup
Now you can learn a 4-wire test. First learn the fixture, and then learn the tested device.
1. From the main menu, press
Set Up Test Program.
2. Press
Create New Test.
3. Press
Learn.
4. Make sure only the 4-wire fixture is
connected and press
CONTINUE
to learn
the fixture.
Note:
Be sure to turn off the 4W Kelvin setting after learning a 4-wire test. This will prevent
problems when learning a 2-wire resistance setup.
Connect the assembly to be tested, and press
Continue
to learn the wiring pattern of the
sample tested assembly.
The tester should make a sound indicating the
assembly has been learned; the screen will
display CABLE LEARNED.
4W POINT TYPE
J1A007 = Type 2
Summary of Contents for 1100R+
Page 1: ...Version 2011 1 0 November 10 2011 1100R User s Manual...
Page 28: ...24 Using the Tester...
Page 78: ...Connections continued Net Test Points Components...
Page 79: ...Notes...
