Chapter 22
| LLDP Commands
– 571 –
lldp med-tlv
network-policy
This command configures an LLDP-MED-enabled port to advertise its network
policy configuration. Use the
no
form to disable this feature.
Syntax
[
no
]
lldp med-tlv network-policy
Default Setting
Enabled
Command Mode
Interface Configuration (Ethernet, Port Channel)
Command Usage
This option advertises network policy configuration information, aiding in the
discovery and diagnosis of VLAN configuration mismatches on a port.
Improper network policy configurations frequently result in voice quality
degradation or complete service disruption.
Example
Console(config)#interface ethernet 1/1
Console(config-if)#lldp med-tlv network-policy
Console(config-if)#
lldp notification
This command enables the transmission of SNMP trap notifications about
LLDP changes. Use the
no
form to disable LLDP notifications.
Syntax
[
no
]
lldp notification
Default Setting
Enabled
Command Mode
Interface Configuration (Ethernet, Port Channel)
Command Usage
◆
This option sends out SNMP trap notifications to designated target stations
at the interval specified by the
command. Trap
notifications include information about state changes in the LLDP MIB
(IEEE 802.1AB), or organization-specific LLDP-EXT-DOT1 and LLDP-
EXT-DOT3 MIBs.
◆
SNMP trap destinations are defined using the
command.