Chapter 8
| Authentication Commands
AAA
– 213 –
Example
Console(config)#aaa group server radius tps
Console(config-sg-radius)#
server
This command adds a security server to an AAA server group. Use the
no
form to remove the associated server from the group.
Syntax
[
no
]
server
{
index
|
ip-address
}
index
- Specifies the server index. (Range: RADIUS 1-5,
1)
ip-address -
Specifies the host IP address of a server.
Default Setting
None
Command Mode
Server Group Configuration
Command Usage
◆
When specifying the index for a RADIUS server, that server index must
already be defined by the
◆
When specifying the index for a server, that server index must
already be defined by the
command.
Example
Console(config)#aaa group server radius tps
Console(config-sg-radius)#server 10.2.68.120
Console(config-sg-radius)#
accounting dot1x
This command applies an accounting method for 802.1X service requests on
an interface. Use the
no
form to disable accounting on the interface.
Syntax
accounting dot1x
{
default
|
list-name
}
no accounting dot1x
default
- Specifies the default method list created with the
list-name -
Specifies a method list created with the
command.
