Chapter 8
| Authentication Commands
AAA
– 208 –
Command Usage
◆
The accounting of Exec mode commands is only supported by
servers.
◆
Note that the
default
and
method-name
fields are only used to describe
the accounting method(s) configured on the specified server,
and do not actually send any information to the server about the methods
to use.
Example
Console(config)#aaa accounting commands 15 default start-stop group
Console(config)#
aaa accounting dot1x
This command enables the accounting of requested 802.1X services for
network access. Use the
no
form to disable the accounting service.
Syntax
aaa accounting
dot1x
{
default
|
method-name
}
start-stop group
{
radius
|
|
server-group
}
no aaa accounting
dot1x
{
default
|
method-name
}
default
- Specifies the default accounting method for service
requests.
method-name -
Specifies an accounting method for service
requests. (Range: 1-64 characters)
start-stop
- Records accounting from starting point and stopping
point.
group
- Specifies the server group to use.
radius
- Specifies all RADIUS hosts configure with the
command.
- Specifies all hosts configure with the
server-group -
Specifies the name of a server group configured
with the
command. (Range: 1-64 characters)
Default Setting
Accounting is not enabled
No servers are specified
Command Mode
Global Configuration
Command Usage
Note that the
default
and
method-name
fields are only used to describe the
accounting method(s) configured on the specified RADIUS or
