SIGLENT SDM3055A, User Manual

Page: 50 / 236

SIG L ENT
40 SDM3055 Digital Multimeter
Short-circuit Resistance
Set up the short-circuit resistance value in the short-circuit test menu. When
the measured resistance is lower than the short-circuit resistance, the circuit is
considered as connected, and the beeper sounds (if sound is turned on). The
short-circuit resistance is only applicable to the continuity test.
Operating Steps:
1. When Continuity function is selected, press
【
Threshold
】
to enter interface
as the following diagram.
Diagram 2- 36 Set Up the Short-circuit Resistance
2. Use direction keys to change the parameter values.
Press left and right directional keys to choose different digits. Each press
for the Left key, former number will be selected, vice versa. Press up and
down keys to change the current digit value. Each press for the up key,
value will be increased 1, vice versa.
Short-circuit Resistance:

The range of short-circuit resistance is 0Ω~2000Ω. The default value is
50Ω.

The value of short-circuit resistance is stored in the nonvolatile memory
and the resistance remains unchanged after the power is off.